ESH41 heat-pump compressor for Tesla Model 3 / Model Y
Ex-works price per unit. Freight, duty and local tax are quoted separately.
- Brand-new unit — never a rebuilt or re-sealed core
- 12-month / 12,000-mile warranty, parts and labour
- Replaces both Denso and Sanden factory compressors
- Pre-filled with POE 68 oil, ready to install
What you are buying
The ESH41 is a 41 cc electric scroll compressor built for the replacement market. The scroll set, controller, motor and housing are new parts with new tooling — the unit is not machined from a used core and it is not a reverse-engineered copy of the factory part.
Because the controller speaks both factory protocols, one SKU covers Denso-built and Sanden-built cars. That also removes the two fault codes that most often come back after a rebuild: W139 (compressor communication) and W219 (compressor performance).
In the box
- ESH41 compressor, oil pre-charged
- Inlet and outlet port caps
- Warranty card with registration QR
- Installation and flush checklist
Before you install
- Flush the system. Aluminium debris from a failed compressor will destroy the new unit within days and is not covered by warranty.
- Replace the drier and the O-rings. They cannot be cleaned and cost very little.
- Do not add oil. The unit ships with 250 ml of POE 68.
- Torque the high-pressure line and the mounting bolts to 22 N·m.
ESH41 technical data
Data from the supplier test sheet. Bench values measured with R134a; R1234yf behaves the same within normal operating range.
| Part number | ESH41 (41 cc electric scroll) |
|---|---|
| Application | 2021–present Model 3, 2020–present Model Y, heat-pump vehicles |
| Replaces (Denso) | 1501256-00J / 00K / 00L / 00M |
| Replaces (Sanden) | 1582668-00F / 00H / 00I / 09J |
| Refrigerant | R1234yf or R134a |
| Oil charge | POE 68, 250 ml — pre-filled, do not add |
| Supply voltage | DC 350–400 V |
| Speed range | 1,500–4,000 rpm rated, 8,000 rpm limit |
| Cooling capacity | 4.5 kW at 4,000 rpm |
| COP | 2.1 |
| Dimensions | Approx. 280 × 180 × 220 mm |
| Weight | 7.45 kg including oil |
| Pipe / bolt torque | 22 N·m high-pressure line, 22 N·m mounting bolts |
| Standard | GB/T 22068-2025 |
| Origin | Made in China (Jiangsu) |
Which cars this fits
The ESH41 covers the 41 cc heat-pump system used on Model 3 and Model Y. Open the frunk, remove the plastic cover on the left: if you see the octovalve module next to a 41 cc compressor, this is the right part.
| Model | Years | Notes | Status |
|---|---|---|---|
| Model Y | 2020 – present | All trims with heat pump | Confirmed |
| Model 3 | 2021 – present | Heat-pump vehicles only | Confirmed |
| Model 3 / Y (2017–2020) | Earlier | PTC heater, different compressor | Not compatible |
Warranty, installation and fault codes.
What the warranty covers
- 12 months or 12,000 miles from the invoice date, whichever comes first.
- Parts and labour, including a replacement unit if the scroll set fails.
- Registration with the QR card is required to activate coverage.
- Claims are handled by email with photos and the workshop invoice.
What it does not cover
- Damage from aluminium debris, blocked expansion valve or a system that was not flushed.
- Wrong refrigerant, wrong oil type or wrong oil quantity.
- Damage from a drop, improper handling or installation by an unqualified technician.
- Refrigerant, oil, labour or other costs outside the unit itself, unless the full package was purchased.
Before you order
Is this a new part or a rebuilt one?
New. The scroll set, controller, motor and housing are produced with new tooling. We do not sell rebuilt or re-sealed cores.
Will it fit my car?
It fits 2021 and newer Model 3 and 2020 and newer Model Y with the heat-pump system (41 cc compressor next to the octovalve). Earlier cars with a PTC heater use a different compressor. Send us the VIN and we will confirm before you pay.
Does it work with both Denso and Sanden cars?
Yes. One controller covers both factory protocols, which is why a single SKU replaces Denso 1501256-00J/K/L/M and Sanden 1582668-00F/H/I/09J.
Do I need a dealer software update?
No re-flash is required. The controller identifies the vehicle protocol on start-up, and the W139 / W219 codes that appear with rebuilt units do not return.
Do I have to flush the system?
Yes, always. Debris from a failed compressor circulates through the loop and will damage the new unit within days. A system that was not flushed is excluded from warranty.
What refrigerant and oil does it use?
R1234yf or R134a, with 250 ml of POE 68 oil pre-filled at the factory. Do not add oil.
What does the warranty cover?
12 months or 12,000 miles, whichever comes first, for parts and labour. Register the unit with the QR card in the box. Failures caused by debris, wrong refrigerant or installation errors are excluded.
Need a fitment check or a price?
Tell us the model year and the VIN. We will confirm the part, the freight and the lead time — usually the same working day.
Request a quote
No account needed. We reply within one business day.